Bonjour

Bien entendu. Le VL70m est en fait l'une de nos machines de test (et de référence).

Musicalement

Effectivement Marc, le Sylphyo est monophonique mais de fait il est capable d'envoyer chacun de ses contrôles sur chaque axe:
en alternative à ce que décrit Peter, sélectionner le canal 2 devrait fonctionner, il faut juste changer les assignations MIDI des gestes:

• Souffle => AT ? / Z
• PitchBend = PitchBend / X
• pour le Y il y a du choix entre Elevation, Roll, Slider ...

Nous n'étions pas au Synthfest pour consacrer un maximum de temps au Loom et à l'Omega. Ce sera pareil pour le SuperBooth.

On le regrette c'est toujours une excellente occasion d'échanger avec les musiciens mais c'est aussi particulièrement chronophage ...

We probably won't be either at Superbooth 2024 nor SynthFest France 2024 as we are quite busy and focussed on the Anyma Omega Development.

This is just an undocumented behavior we apply to the soundset list.
Each time you reach the top of the list you get back to the first one.

Tout dépend de ce qu'on entend par "via Anyma Phi".
A ce stade, les sons de l'Anyma Phi ne sont pas "directement" transférable dans le Sylphyo.
En revanche, il reste tout à fait possible de piloter les sons de l'Anyma Phi avec un Sylphyo en MIDI.

Hello Teknico

Interesting feedback. Thank you.

One thing to keep in mind is that the Anyma Phi being monophonic connecting MPE controllers to play it is not necessary the first use case.

The USB MIDI Host is meant to allow the connexion of MIDI Class compliant device but it seems that this "standard" is still subject to various interpretation among MIDI controller manufacturer.

What we tested on our side among MPE device though are 2 of the one you listed:

• ROLI Seaboard Rise and Seaboard Block are working with the Anyma Phi
• Haken Continuumini was also tested but with the result you described with this "not enough power" message on the Continuumini although the power provided should be enough. We made a few attempts to check this was a USB software protocol trick (by rising the available power message) but with no success so far.
• We do not have any Linnstrument in our workshop yet so we couldn't make any test on this one. We weren't aware of the various speed available on this one. (This could make it a valuable test unit for our tests with the Omega).
• USB Hub is not really something we expect to work as the device is intended to manage one controller device.

One thing to keep in mind is that the main target of this USB MIDI Host port is to allow the use of the Anyma Phi with a controller which does not feature any DIN connector, so the expected MIDI speed is currently the standard MIDI speed.

The Anyma Omega will be done using a new generation board so there will be much more ressources available to manage a higher speed MIDI (and the merge and routing of MIDI coming from the various MIDI port: USB device, USB Host, DIN MIDI In ... and the "internal" command coming from the keyboard and ribbons, the CV/Gate signal etc.).
This is part of the necessary spec for the MPE compatibility of the Omega.
Once this would be done, we could then check what could be transferred back from the Omega to the Phi.

@Peter-Ostry it is indeed the place for the dynamic mouthpiece connection and should be sealed..

It really looks like a hack.
I get through the recovery process and temporary put the site offline to let us find and clean the infected files on the website.

@AndyHornBlower We cannot "solve" this known problem on our own as it looks like a Ventura bug also reported to have impact on many other devices.
Hopefully, Apple will fix this.
Meanwhile, I do not think anyone has been left with a none working device. As far as I know @Lyricon succeeded to recover using the trick you provided.

Yes Simon, I found the bug and fixed it.
I still have to make a few more test before updating the files but as you guessed we are quite busy with the Omega today.

@reidid789 nice track.
I am always surprised and happy to ear the various and creative kind of music made using the Sylphyo