Aodyo Instruments

    Aodyo Community

    • S'inscrire
    • Se connecter
    • Récent
    • Catégories
    • Recherche

    high-pitched whistles on Link

    Sylphyo General
    2
    3
    312
    Charger plus de messages
    • Du plus ancien au plus récent
    • Du plus récent au plus ancien
    • Les plus votés
    Répondre
    • Répondre à l'aide d'un nouveau sujet
    Se connecter pour répondre
    Ce sujet a été supprimé. Seuls les utilisateurs avec les droits d'administration peuvent le voir.
    • F
      Fanch35 dernière édition par

      Hello
      I encounter a problem (since the beginning of my journey with Sylphyo) : I get high-pitched whistles when I use Sylphyo+Link+PC+headphones on Link.

      My chain :
      Sylphyo -> Link : by air;
      Link -> PC : "USB power supply" of Link & "USB" of PC;
      soft(s) : Reverso or Kontakt or SylphyoBench;
      audio device type on PC : "windows audio" or "Asio4all v2";
      PC -> Link : via "Headphone OUT" of PC & "LINE IN" of Link;
      Link -> Headphones : via "PHONES OUT" of Link or "LINE OUT" of Link;

      Sum up : Sylphyo+Link+PC+Link+headphones = whistles;

      Other configurations :
      Sylphyo+Link+headphones = OK;
      Sylphyo+Link+PC+headphones = OK;

      Any idea of the whistles' origin(s) ?

      1 réponse Dernière réponse Répondre Citer
      • Clint
        Clint dernière édition par

        I am not surprised at your "high-pitched whistles" ... I think the problem has to do with the routing of signals on the Link.

        The link turns out to be pretty complex and it took me a while to figure it out. However, once I did, I found that the routing can be useful in some situations.

        Here is my rendition of the routing:

        SigPathCG_Link_2022_0503a_150dpiC10.jpg

        The phones port (and the Line out ports) are a combination of "A" and "L". "A" is the synthesized sound produced from all the MIDI inputs on 4 different paths. "L" is the Line In port - the one you are feeding back from your PC.

        Having two different feeds of the same sound can produce a number of issues: clipping because of too high a combined signal, echo or phase cancellation due to slightly out-of-phase sounds that result from different latencies on the two paths, etc.

        -- Clint Goss

        1 réponse Dernière réponse Répondre Citer
        • F
          Fanch35 dernière édition par

          Hey Clint !
          The Master of the Link !!
          How many tries to get the good rendition ?

          Ok, so, if I have well understood,
          because of the mixing between A and L generating "whistles",
          it's NOT possible to use LINE IN as an AUDIO INTERFACE for a PC/SoundHardware in the configuration : Sylphyo-Link-PC/SoundHardware ?

          1 réponse Dernière réponse Répondre Citer
          • 1 / 1
          • Premier message
            Dernier message
          Copyright © 2015 NodeBB Forums | Contributors

          Il semble que votre connexion ait été perdue, veuillez patienter pendant que nous vous re-connectons.