Posts made by reidid789

Merci fcred pour ce message. Bizarre que après que certains aient tant attendu, il n'y ai pas plus de communication par Aodyo sur le sujet.
Il y a tellement longtemps qu'il n'y a pas eu de mise à jour à faire que je ne sais plus le faire ... lol

Je viens de découvrir sur le net (bien sur) l'utilitaire Cognitone pour Akai ewi usb.
J'en parle car c'est exactement le ' genre ' d'utilitaire que je souhaiterais avoir avec le Sylphyo et dont j'ai parlé quelquefois sur ce forum. Une fois de plus cela ne m’empêche pas de dormir mais serait le bien venu.
Aodyo parle beaucoup de leurs Anyma mais plus du tout de Sylphyo. Ce serait un bon clin d'oeil de faire un truc comme cela pour les possesseurs de Sylphyo qui continu à se poser des questions. !

@Peter-Ostry et @Friedus, I cannot deny that you are both right.
I cannot imagine that no one from Aodyo reads these posts. So, Aodyo, can we have general health information of the start up?

If I may afford, Friedus, buy Respiro from Imoxplus or Eviner from Davidson Audio & Multimedia and you will no longer need an update of Aodyo.

En ce qui me concerne, je n'attends que le petit utilitaire qui permettrait de gérer tous les paramètres midi du Sylphyo car c'est contraignant directement sur le controleur !?
Pour les sons internes (qualité moyenne +) il y en a assez pour travailler l'instrument.

@Paul-Flute
I am in the same case as you and your message is good!
And I find the video funny.

@Peter-Ostry said in Under the Blue Ring:

Slowly, slowly... one strength of the Sylphyo is its very special sensitivity to airflow, which makes it probably the only wind controller that can really sound like a wind instrument. Of course, many of us would like something like the Photon mouthpiece, but it would make the Sylphyo a different instrument because the Sylphyo’s sensor is bypassed and the airflow is measured differently.

For me, it would be fine to be able to use the Sylphyo in two configurations. But I am not sure if I would still like to have these strange touch surfaces of the Sylphyo together with the Photon mouthpiece. I think with the Photon I would like mechanical buttons/flaps better. Special functions like sucking as a separate event are of course great, especially for experimental music.

But even though the Photon mouthpiece promises many features, I would actually prefer to have a better version of the Yamaha WX mouthpiece on the Sylphyo. To let the air flow through and to transmit the position and movement of the reed into the prepared slot to the Sylphyo electronics.

Peter, I was lucky to be able to test the photon1 prototype on the Sylphyo and I assure you that it makes you forget the particular sensitivity to the air flow of the Sylphyo. It is an experience that I wish you because the trio Sylphyo/Photon1 + Respiro (Imoxplus) really sounds like a wind instrument and very far in front of the couple Sylphyo + Respiro.
But as experience is not currently possible, Peter, let's continue to assess Sylphyo as it is while waiting for the necessary evolution of this Wind Controller ...

@Gromit
Yes, the photon mouth is exactly that and therefore no more humidity in the Sylphyo which will solve all Clint's problems!
Strongly the final photon ...

@Friedus said in More Internal Sounds needed here!:

I use the midi capabilities of the instrument coupled with external software (like samplemodelling) when I am at home. but I want the most really good internal sound because I just want to take the Sylphyo with me and plug in an amp. Not to carry other things like Laptops or Computer etc.

Friedus, But indeed I use an internal sound to work on the Sylphyo in the helmet when I am on the go. In this case I do not need a great audio quality and a sound is enough for me.
As Peter Ostry says we could delete all sounds from the Sylphyo because it is now enough to connect it to your smartphone and use free breathing in displacement.

@Laurent_AODYO I had not read your answer when posting precedently on the subject of software to help configure the Sylphyo.
I understand all your problems and your choices. Besides, I do not ask you for new sounds which anyway will not compete with Respiro, Lyrihorn ...
But understand impatience pending tools for Sylphyo who would help us.
And speaking of music, I take advantage of it because in this song there is a lot of Sylphyo and Respiro: https://didg.bandcamp.com/track/hommage

It is true, Clint, that when we suggest something in development, I do not measure the amount of work that this represents for for example Aodyo.
By cons I measure very well the work that the creation of Anyma Phy or Omega represents. And I deduce that Aodyo now privileges the creation of Synthe rather than the development of Sylphyo.
I reopen the debate but what interests me is that the Sylphyo becomes better rather than buying another synth ...

Dommage qu'il n'y ai pas de réaction ni de Aodyo ni des utilisateurs.
Après c'est pas ce qui nous empêche de jouer, mais ce serait sympa.

It really lacks a small utility on PC and Mac to configure and record all the parameters of the Syphyo.
I am ready to put a silver piece in a kickstarter to do it ... but I saw that the attention of Aodyo is rather Anyma than Sylphyo!

What is happening ? What does perverted messages or something escape me?

wwoodard8, it is a promotion from € 879 to € 719, I think!

Most Sylphyo (including mine) do not have a battery problem!
I will not wait to send him back to the store.

Give us the result after these 48 hours!

If what you decide would happen to me is a return to the store or at Aodyo

How do we become beta-tester? I do not remember

Thanks to the Aodyo team, I received validation yesterday.

@join Thank you for this different information.
We had guessed the situation and the objectives of Aodyo with Anima Phy and the Sylphyo which today is a successful instrument. There was a concern for the future as for many start-ups but I think people here are reassured.
Little product is as much updated as you and the new sounds are gadgets for me to work on the train or on the plane. To work seriously I am with respiro.
I know that the time is not easy for companies (covid19, Uckraine, God keeps them). I am happy to have come out of the business world and to make music! Good luck.
didg.bandcamp.com

StevieK, me too

Hello everyone,
So we all come to the same conclusion (see my recent post and I had not seen this thread).
I chose Sylphyo and I want the instrument to continue but ...

Thank you Clint for this encouraging answer.
I have been using Sylphyo for a very long time and it is an instrument that I really appreciate (see the use that I do with Respiro in the song Luner for example on the didg.bandcamp.com website).
But there are many clues that make me think that the Aodyo team is too short to manage two Anyma Phi and Sylphyo products together. There are people on this site who complain that Sylphyo does not evolve (version 1.4.8 for more than a year) and my subject above.
And it's really a shame because there is a reele competition. But I also understand because the means come with the euros that come home or not to Aodyo and it is a vicious circle.

Bonjour,
Joueur de Sylphyo, un ami m'a conseillé de m'inscrire sur facebook Sylphyo Exchange (https://www.facebook.com/groups/144607196229171/permalink/940134890009727/). J'ai lancé m'a demande d'adhésion il y a maintenant pas mal de temps et j'obtiens depuis le message suivant :
Votre adhésion est en attente
Vous recevrez une notification si votre demande d’adhésion est approuvée.
C'est un Groupe privé géré par Aodyo. C'est pourquoi je vous pose la question ici : le fait de ne pas avoir de réponse vaut-il que mon adhésion a été refusé ?

@join, it's weird because I had this problem (see the attached picture Track 1) in 2020. What is irritating is that I no longer remember the reason for this problem but it was not my sylphyo and Respiro who was responsible.
If I find the cause I say it in this forum!

Hi Gromit,
This photon - sylphyo couple has already been mentioned here. Photon is superb as well as the sylphyo too. And be able to play with the two devices without a stress of USB liner (all passing in radio signal) it would be the dream ... it seems that the two starts up do not wish to work together and at the technical level I know that the photon transmits enormously from data ... to them to tell us if he wishes Rudy and "join". In any case, I repeat, it would be the dream!
didig.bandcamp.com

For info, I use respiro with sylphyo since the first day of their outings and I have no problems that you seem to meet.

Merci Clint. Je ne sais pas comment tu as fait mais c'est efficace!
Musicalement,
Didier

Musicien et utilisateur inconditionnel du Sylphyo, j'ai suivi un fil de discution de quelqu'un sur EWi 4000 ou 5000 septique avec une réponse bien fondée et tempérée de Jonathan Aceituno. Je voulais faire une réponse mais je ne le retrouve pas ...

Perfect, I will try that.
Thanks to CSP and Aodyo Support

@csp Thank you, that sounds very interesting!
Can you tell me what the red charger QC3.0 corresponds to: the indicator indicates 9V and it is normally 5V? and is it on this connector that you plug your Sylphyo, or on one of the 4 2.4A connectors?

Well done Clint, huge job! To be studied in detail!
Thank's
Didier

You're right, frank, and that doesn't really stop me from playing Sylphyo. But ... Sylphyo must be ON, you unplug, you see that the little battery logo is not full and you plug again; Well; my "dream" would be for Syphyo to be OFF and at the end of the charge a full battery logo appears. I guess the problem is that when the button is OFF nothing can be displayed, too bad.

Maxence, merci pour cette réponse.
Maxence, thank you for this answer.

Bonsoir,
Est il possible que quelqu'un d'Aodyo réponde à ma question ?
Merci d'avance.
Didier

Good evening,
Could someone from Aodyo answer my question?
Thank you in advance.
Didier

Bonsoir,
C'est une demande récurrente de bien des utilisateurs dont je fais partie.
Avoir un petit logo de pile (comme pour les montres) qui se charge glignotant et qui se fige quand la charge est terminée serait parfait !
Il faut que Aodyo nous dise franchement si c'est possible ou pas pour eux. Merci d'avance.

Good evening,
This is a recurring request from many users of which I am a part.
Having a little battery logo (like with monsters) that charges, flickering and freezes when charging is complete would be perfect!
Aodyo needs to tell us frankly if it's possible or not for them. Thank you in advance.

MusicOne, I hadn't seen a post from Aodyo that he was actively working on a "smart" mouthpiece. On the other hand, without being in the secret of the Gods, I have the feeling that the Imoxplus team is actively working on it ... to know if now it will be adaptable on our Sylphyo? Let's be a little patient ...

Thank you very much, Fred for that.

Fred, est-on obligé d'acheter GeoShred à 28€ pour avoir accès au preset Swam à 16€ ou peut on passer par GeoShred Play qui est gratuit mais qui ne semble pas s'installer sur l'iphone ?
Je ne trouve pas la réponse sur le site et honnêtement je n'ai pas besoin de GeoShred ...
Tout cela bien sur pour être joué avec mon Sylphyo

Thank you, Fred for this feedback

Hi Fred,
Thank you for this clear message, very interesting and which gives the solution to the use of the Swam app. I am a flutist and looking for a good realistic flute sound but not at the price of Swam for PC or Mac that I can't stand (for original presets I'm a die-hard Respiro fan).
I have an iphone 6s plus but have so far never used it for music judging my studio to be better than an iphone which otherwise does wonderful service.
You make me want to test the GeoFlute app with the sylphyo but how do you use the output sound of the iphone: only with headphones or do you use the mini jack output on a professional mixer? and if so what is the quality?

Good evening Maxence and troy,
It's interesting to have such quick and useful feedback from both of you.
Indeed, I have the CC2, CC1 and CC7 reflex to try to bring to life the presets of many plugin instruments such as AAS UltraAnalog V2 or AIR Hybrid, Vaccuum Pro, Velvet, Xpand ... and not CC11. So I'm going to try all of this and get back to you when it's done. I will test the action of CC11 on VCA of these VSTi as indicated by Maxence (Maxence, I am in contact with Rudy Verpaele and help as I can. I did the manual in French and some studiodid sounds. told me about getting in touch)
Thank you and see you soon.

troy, I take this opportunity because the subject of using hardware and software synths with our wind controllers is very interesting (knowing also that I mainly play my Sylphyo with Respiro from imoxplus, awesome and the best plugin for wind controllers) .
And my question is: I can not take full advantage of hard and soft synths because almost none uses the Breath control CC2. And using Volume CC7 or Modulation Wheel CC1 does not give the best result. Do you have an idea to get around this?

troy, j'en profite car le sujet d'utiliser des synthés hardware et software avec nos controleurs a vent est tres interessant (sachant aussi que je joue principalement de mon Sylphyo avec Respiro de imoxplus, génial et le meilleur plugin pour controleurs a vent).
Et ma question est : je n'arrive pas a profiter pleinemment des synthes hard et soft car quasiment aucun utilise le Breath control CC2. Et utiliser le Volume CC7 ou le Modulation Wheel CC1 ne donne pas le meilleur resultat. As tu une idee pour contourner cela ?

Je viens de voir que mon clavier a des soucis ... ou le bonhomme ...
Le texte complet est :
N'est il pas possible d'afficher un tout petit logo dans l'afficheur pendant le temps de charge. On serait certain que la prise sur lequelle on est alimenté fonctionne bien : ca m'est arrivé et je me suis retrouvé avec mon Sylphyo out.
Ce serait sympa d'avoir des retours.

C'est aussi effectivement une bonne idée totalement nécessaire.

C'est un point de détail mais ...
N'est il pas possible d'afficher un tout petit logo dans pendant le temps de charge. On serait certain que la prise sur lequelle on est alimenté : ca m'est arrivé et je me suis retrouvé avec mon Sylphyo out!

Bonsoir,
Juste pour signaler que Laurent m'a donné la solution qui peut intéresser toute la communauté :
En fait mon link était alimenté par un des ports USB de mon PC qui génère ce bruit électronique. Le passage sur une alimentation isolée a fait disparaitre quasi totalement ce parasite (certainement lié à des phénomènes de boucle de masse.
Donc, rien à voir avec mon Sylphyo.
Merci à Laurent qui en l'absence de Maxence à réglé mon problème.
Didier