Aodyo Instruments

    Aodyo Community

    • S'inscrire
    • Se connecter
    • Récent
    • Catégories
    • Recherche

    Sylphyo => XpressO Issues - Breath Rate [SOLVED]

    Sylphyo General
    2
    4
    387
    Charger plus de messages
    • Du plus ancien au plus récent
    • Du plus récent au plus ancien
    • Les plus votés
    Répondre
    • Répondre à l'aide d'un nouveau sujet
    Se connecter pour répondre
    Ce sujet a été supprimé. Seuls les utilisateurs avec les droits d'administration peuvent le voir.
    • Clint
      Clint dernière édition par

      Wrestled for two days setting up an XpressO with the Sylphyo. Routing MIDI through the Link then to the XpressO via 5 pin DIN as well as USB produced bizarre artifacts, clicks, stuck notes, harmony notes, etc. Results are different for DIN and USB, but still bizarre.

      The issue seems to be the volume of MIDI data or the speed of CC#2 (Breath Pressure) updates.

      I changed the setting on the Sylphyo => MIDI Mapping => Breath => Breath rate from Medium (250 Hz) to Low (125 Hz) and all the issues and artifacts have vanished.

      I did try the [Very low] (63 Hz) setting but that failed badly. The XpressO does not seem to recognize breath pressure changes at that low rate, and the notes hold their initial velocity without changing volume.

      -- Clint Goss

      B 1 réponse Dernière réponse Répondre Citer
      • B
        Bernard Béville @Clint dernière édition par

        @clint
        Je ne comprends pas ces difficultés. J'ai acheté un XpressO, je l'ai branché, je n'ai rien modifié aux réglages. Tout fonctionne depuis.
        Avez vous contacté l'autyeur de ce matériel ? J'ai eu besoin de lui une fois, il m'a répondu immédiatement.

        I do not understand these difficulties. I bought an XpressO, I plugged it in, I didn't change anything in the settings. Everything has been working since.
        Have you contacted the author of this material? I needed him once, he answered me immediately.

        Clint 1 réponse Dernière réponse Répondre Citer
        • Clint
          Clint @Bernard Béville dernière édition par

          @bernard-béville I should have reported the software versions I am working with: 1.4.8 for the Sylphyo and 2.0.00rc13.7 for the XpressO. The XpressO version may have something to do with it since I think Ingo has changed a lot in the recent releases. The default setting for Breath Rate is Medium on the Sylphyo, so if you are using "default settings" then you will have that setting, I think. I did change to Low and did not notice any effect (other than curing the artifacts on the XpressO)

          J'aurais dû signaler les versions logicielles avec lesquelles je travaille : 1.4.8 pour le Sylphyo et 2.0.00rc13.7 pour le XpressO. La version XpressO y est peut-être pour quelque chose car je pense qu'Ingo a beaucoup changé dans les versions récentes. Le paramètre par défaut pour Breath Rate est Medium sur le Sylphyo, donc si vous utilisez les "paramètres par défaut", vous aurez ce paramètre, je pense. J'ai changé en Low et n'ai remarqué aucun effet (autre que la guérison des artefacts sur le XpressO)

          -- Clint Goss

          Clint 1 réponse Dernière réponse Répondre Citer
          • Clint
            Clint @Clint dernière édition par Clint

            This issue seems to be fixed in the latest RC13.7 release (dated 7/18/2021). (I was actually using an earlier RC13.7 version dated 7/11/2021 when I had these issues).

            I can now increase the Breath Rate on the Sylphyo all the way up to Max with no apparent problems.

            Loving the Sylphyo + XpressO combination!

            -- Clint Goss

            1 réponse Dernière réponse Répondre Citer
            • 1 / 1
            • Premier message
              Dernier message
            Copyright © 2015 NodeBB Forums | Contributors

            Il semble que votre connexion ait été perdue, veuillez patienter pendant que nous vous re-connectons.