Dynamic velocity not working?

Peter Ostry

(Firmware 1.4.8 on Link and Sylphyo)
Dynamic velocity does not work properly here. Seldom it follows breath. See the readout of Midi Monitor below, where I played 4 times from very soft to as hard as I can. Instead of expected velocity from almost 0 up to 127 I got 1, 19, 18, 4.

16:02:42.499	From Sylphyo Link	Note On	1	G3	1
16:02:42.625	From Sylphyo Link	Note Off	1	G3	0
16:02:43.777	From Sylphyo Link	Note On	1	G3	19
16:02:43.885	From Sylphyo Link	Note Off	1	G3	0
16:02:45.116	From Sylphyo Link	Note On	1	G3	18
16:02:45.379	From Sylphyo Link	Note Off	1	G3	0
16:02:46.713	From Sylphyo Link	Note On	1	G3	4
16:02:47.066	From Sylphyo Link	Note Off	1	G3	0

Maybe it depends on some settings?
Breath – Range 5-2000, Curve Log, Filtering OFF.
Keys – Reaction time 10 ms, More sensitive ON.
Velocity – Dynamic, Capture delay 20 ms, Max. velocity 127.

Support_AODYO

@peter-ostry Try changing the capture delay to something lower than 20ms. Are you using a plug to block the exit of the Sylphyo? If not then you should probably not be using 2000 range on the breath settings.

Peter Ostry

@support_aodyo No plug, the Sylphyo exit is open. I lowered capture delay to 10, 5 and 0 ms and the breath range to the default 600. No success.

New observation: My dynamic velocity works for legato but not for single notes. When I play a series of single notes with equal force, the velocity values are rather random.

After a factory reset – which parameters do I have to change to make dynamic velocity working on single notes? From this point I should be able to figure out what to do and what not.

Support_AODYO

@peter-ostry Interesting. Thanks for the observations. We will have a look at this next week.