Pairing with Link in v.1.4.7?
-
Since the update to 1.4.7, the Sylphyo won't respond to the command to actively search for an available Link. Has anyone been succesful?
Best regards, Chris
-
Hi Chris! Thanks for posting on the Support forum.
We can continue on from our e-mail discussion on here if you want, and then other people can post their ideas.
As I said in my e-mail, can you try rolling back to 1.4.6 to see if that works?
Thanks,
Maxence
Aodyo Instruments
Aodyo.com -
Update after some days of trying about 8 earlier software versions on both Sylphyo and Link: no change. The Link is stuck in pairing mode. Since my intended workflow relies on using outboard sounds, I will go back to the store, so they can decide what to do.
-
@Chris I think in this case as agreed over e-mail, it is best to send this unit back to Bax for a return.
For information this was a B-stock Sylphyo that clearly had issues before Chris got it.
Sorry for the disappointment Chris and let me know if there is anything I can help with.
Maxence
Aodyo Instruments
Aodyo.com -
@Support_AODYO I am having the same problem, I've been doing really exciting things with my sylphyo these days and I don't want it to stop :'( pls help me !
I've tried all the solutions listed in the 2 threads about the same issue and nothing helps... -
@Hamcat said in Pairing with Link in v.1.4.7?:
I've tried all the solutions listed in the 2 threads about the same issue and nothing helps...
So far one of the solutions is to install the 1.4.8 beta update which I can send you in a message. Some users have also had success with installing the update several times until the pairing functions again. Let me know if you have any luck.
-
@Support_AODYO well actually I have tried several times with v.1.4.8 beta, also with 1.4.7 and earlier versions, still nothing...
-
For the record: the Sylphyo mentioned above was returned to Aodyo for a checkup. I got it back in March, and while the functional issues were solved, there was still a problem with the fit of the outer casing: the upper half of the bell doesn't quite match the bottom. Bax has sent me another Sylphyo as a replacement, which appears to work fine. It has the same problem with the bell though.
