ROLI SEABOARD RISE ??
-
I Tried To Connect My Roli Seaboard Rise,To The Anyma Phi,And The Anyma,Will Not Trigger.One Of The Demo Videos,Showed,The Anyma,Being Triggered,By A Seaboard Rise.Can Anyone Offer Any Suggestions,As To How To Accomplish,This Connection ??
I Triggered The Anyma,With A Novation BaseStation2,With No Problem,Short Of The Pitchbend Limitation. -
@moogyloogy I'm trying to find out more about how to make the Anyma Phi work with the Seaboard Rise and I will let you know once I find out!
-
Maxence,Thnx Much !!
-
Maxence,I Went To Roli Dashboard,And Choose,"Single Channel",For The Seaboard Rise...Now I Can TriggerAnyma Phi.Sadly,The Pitch Strips Are Inactive,So There Is No Pitchbend.Hopefully That will Change With A Future Update.On Another Note...I Tried To Rename A Patch,Within The Editor...Right-Clicking,On The patch Does Nothing...Any Suggestions ??
-
Hi, I tried the Seaboard after making a template following the actual midi settings of Anima Phi (which are slightly different that the midi settings on the manual). Using channel aftertouch, not polypressure. Anima Phi keeps freezing after some notes. After switching on and off, Anima Phi only works again if I switched off also the Seaboard before switching on Anima Phi.
Possible causes:
- Is the Seaboard sending too much information and makes Anima Phi freeze?
- Is the Seaboard getting enough power from the host USB port on Anima Phi?
I will keep experimenting later today…
-
Update: connecting both Anima Phi and Seaboard to the computer, Anima Phi didn’t freeze anymore. The question arises: does Anima Phi supply enough power to connect the Seaboard straight to the USB host post?
However, I couldn’t use the Seaboards onboard controls or aftertouch with the included presets. Maybe they are not programmed to be used with my Seaboard settings?
I will keep investigating.
