Ok here is my little stuido, now the most works well. I can play with the Syph three sounds at one time. The internal, the Vst (here the swam tenor sax, I use Studio one as DAW),, and the Ketron) but with the Notepad and the audiobox I can control what sound I want to hear or record. Lot of cables! I can also record the ketron as an audio simultan to a midi record of the VSt, but not as midi? So for the moment I am satisfed. But also waiting for some new internal Sounds. Friedus

Okay sorry I read another Post and I have paired them.

Thx, I can set the channel in my Audiobox to zero, so I only hear the DAW Sound. Or both when I want to mix it. I did not have trouble to change the Internal Sounds. I also can use this to hear the sounds of the Keltron. But now, I tried to change the bank of the Keltron to my favorite bank, something went wrong. May be I touched the thing called receiver and wireless. No the units do not pair any longer.

Me again, I took the link per midi to my audiobox. Now when I play in my DAW (Studio ON) I hear both the internal sound and the sound of the DAW Instrument. Can I stop the internal sound?

Hello and thank you for the quick updating of my Instrument. Ok the internal sounds are ok I think a beginning. But I wonder how can I change to other sounds like the ones in my keltronsd2.

Hello as I said in another post I really like your links, and i have heard most of them. Meanwhile i own the sd 2 and i am rather satisfied (but the samplemodellings are better in dynamics, means I can better control teh volume with my breathe. Thanks Friedus

Hello, so I heard a lot of good things of the ketron sd 2 I finally bought it, so I didnt need a Computer to run it with my Vst (but I need a Computer, laptop or so because of the USB Power for the Pansa beam,) but ok. Im satisfied with the Ketron, lots of good Sounds. It sounds better with my hifi equipment than with the studio monitors. So when I use it with my Daw (Studio one.) I can also here the sound and make some recordings but I can not hear the recording only with the ketron. I have to use a vst instrument. So here is the way I use it. I go from the midi out of the panda beam, in the midi in of the ketron. From the midi thru of the ketron in the midi in of my audiobox usb. In Studio one I set a new Instrument (I also tried a new Keyboard) that receives from midi in (or from the panda beam) and send to the microsoft wavetable (or other outputs) But nothing works. When I load a midi song I can change the general midi sounds in the output to the sd 2 but i can not hear anything. Maybee someone can help. Greetings from Friedus

Hello. Thank you for the many links and music (well played!) you shared. Now I have many examples for the Ketrons. I play a Sylphyo and an Ewi Usb, mostly in Studio One with Samplemodelling Sounds. Now maybee I will buy me the SD2. Greetings from Germany. Friedus

Hallo Daniel57, ich glaube dass man entweder im Sylphyo dem Midikanal 2 einstellt oder im VST (Host) den Kanal 11. Dann kommt das Signal an. Das heißt aber nicht, dass man dann auch unbedingt den Ton so varieren kann wie es Daniel Kromer meint. Das funktioniert leider bei den VSt die ich ausprobiert habe nicht. Es geht mit Samplemoddelling und Swam Istrumenten und mit Wivi (hab eine Demo). es gibt ein Video wo jemand erklärt wie man es in Kontakt einstellen kann. Ich habe aber nur den Kontakt Player und da scheinen diese Einstellmöglichkeiten zu fehlen. Wenn es doch geht wäre ich auch sehr daran interessiert wie. dei Einstellungen vorzunehmen wären. Im übrigen wüßte ich auch gerne ob es mit den Midi Modulen auch so klappt (sprich Blasdruck varieren regelt die Lautstärke) , wie z.B. mit dem hier öfter erwähnten Ketron Sd2.
Französich kan ich leider auch nicht. Multilinguales Forum hier.
Beste Grüße Friedus

Hello zikorj, fine that your system works. Maybe you can make an vid to show how the sounds are and how the sylphyo works with the dynymics and so. That would be great. Greetings Friedus