Aodyo Instruments

    Aodyo Community

    • Register
    • Login
    • Recent
    • Categories
    • Search

    How to connect Sylphyo LINK audio out to a Mac without audio input?

    Sylphyo General
    3
    8
    308
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Gromit
      Gromit last edited by Gromit

      I want to connect the audio output of my Sylphyo LINK to my Apple M1 Mac mini so I can hear the sounds from the internal synth via my Focal XS computer speaker system. The M1 Mac mini has no audio input jack.
      The Sylphyo LINK is powered from the Mac via the mini USB power supply port. The same cable allows me to control the excellent, Respiro soft synth with the Sylphyo but I would like to be able to hear the Sylphyo LINK's internal synth sound universes too.
      I have found the Behringer Line 2 USB Stereo 1/4" Line In to USB Interface Cable. Would this allow me to hear the Sylphyo LINK's sound universes with my computer speaker system?
      I would connect the USB A plug of the Behringer Line 2 USB into my Mac and the left and right mono ¼" (6.35mm) jack plugs into the LINK's Line Out sockets.
      I have Garage Band and also Apple MainStage.
      Any other audio input solution suggestions for the M1 Mac mini would be welcome too?

      Support_AODYO 1 Reply Last reply Reply Quote
      • Support_AODYO
        Support_AODYO @Gromit last edited by

        @gromit Hi Gromit,

        In every case, for sending audio into a computer, you need an audio interface (an external sound card).
        I've never used the Behringer Line 2 USB but I would recommend a full audio interface, as opposed to a cable. Behringer makes some cheap ones or you can get any other brand, Focusrite is quite popular, so is Motu, Presonus, or Universal Audio if you are willing to spend a bit more.

        Otherwise if you are decided on the Behringer cable, you would indeed connect it to the line outs of the Link into your computer.

        Let me know if you have any more questions.

        Maxence
        Aodyo Instruments
        Aodyo.com

        Clint 1 Reply Last reply Reply Quote
        • Clint
          Clint @Support_AODYO last edited by

          @Gromit ... one thing to note is that the levels output by the Link may be lower than other units you might be using.

          See https://community.aodyo.com/topic/806/link-output-level/6 for a description - @Peter-Ostry reports measuring them in the range of -19dBV to -14dBV.

          So, you might want / need to use a microphone input (i.e. with a preamp) rather than a line level input.

          -- Clint Goss

          1 Reply Last reply Reply Quote
          • Gromit
            Gromit last edited by Gromit

            Thank you for the information, Maxence and Clint.
            I bought the cable yesterday. I should receive it today.
            I figured that it was worth giving it a try as it was relatively inexpensive at £17.99 (€21, $25 USD) including carriage.
            I do not have two mono ¼" (6.35mm) jack cables to hand, to connect between the Sylphyo Link's Line Out sockets and another USB audio interface/mixer so the all-in-one nature of the Behringer Line 2 USB appealed to me.
            I will post again when I have tried the interface cable to give my impressions on it and whether it works with the Sylphyo Link and an Apple Mac mini M1.

            Support_AODYO 1 Reply Last reply Reply Quote
            • Support_AODYO
              Support_AODYO @Gromit last edited by

              @gromit I think it will work, but the sound quality and features might very much be lacking! You will have to update us on how you like it and if it does what you want.

              Maxence
              Aodyo Instruments
              Aodyo.com

              Gromit 1 Reply Last reply Reply Quote
              • Gromit
                Gromit @Support_AODYO last edited by

                This post is deleted!
                1 Reply Last reply Reply Quote
                • Gromit
                  Gromit last edited by Gromit

                  Here's my review of the Behringer Line 2 USB.
                  Sound quality is excellent. Background noise is very low. Nice and quiet.
                  I have my Sylphyo set to the default sound volume (80%) so I guess that the synth engine in the Link is also at 80%? There is plenty of audio level.
                  The Mac mini M1 sees the Behringer as "USB PnP Audio Device". To ensure that I do not get clipping, the input level is at 25%. The volume in my Focal XS 2.1 speaker system is similar to the output from the Respiro software synth.
                  I am using Apple GarageBand. The Behringer is set as a stereo line input ("Monitoring" set to "on"). I'm not noticing any latency.
                  When I took an output from the Link's headphone socket directly into the Focal XS 2.1 speaker system's audio input, I was picking up some audio hum (not loud but annoying) so the quiet background of the Behringer solution via the Link's audio outputs and the Mac, is much better. With the input into GarageBand, I can also record and review my practicing. Which is a helpful bonus.
                  Overall, I'm very impressed as were some folks on Sweetwater.
                  The Behringer Line 2 USB does exactly what I want.

                  1 Reply Last reply Reply Quote
                  • Gromit
                    Gromit last edited by

                    BTW MacOS Big Sur didn't need a driver for the Behringer Line 2 USB but Windows 10 users will need to install the ASIO4ALL driver software (linked from the Behringer product page too).

                    1 Reply Last reply Reply Quote
                    • 1 / 1
                    • First post
                      Last post
                    Copyright © 2015 NodeBB Forums | Contributors