No signal via midi OUT
I came across another issue. I can't make midi OUT to pass on ingoing signals. If I connect further synths via the midi out plug, they are not responding. In the settings, I can't find anything related to this, e.g. such as soft through. Thanks for help.
@deepsea Hello! Is this relating to the Anyma Phi or to the Sylphyo?
@deepsea Are you trying to send information via the USB host port, via a computer through the USB port or via the DIN in ? One thing to note is that the midi out does not function as a midi thru port.
Thanks for the info. Yes, I'm testing DIN in/out.
The manual says:
"... or route MIDI from the USB device port
to an external MIDI device (MIDI out)."
So DIN out as well as USB host are not sending internal messages either? Can this be done in an other way, i.e. using Anyma Phi to control external gear?
@deepsea Through a DAW, you can route midi to the Anyma Phi's midi out, but the usb host and midi in ports won't go through into the midi out.
This is something that we could work on in a future software update if there is interest.
bibenu last edited by
@support_aodyo Soft MIDI Thru would be useful.
Since it would be done in software, you could also consider having the option of simple polyphonic chaining - by not passing on notes that are played, and having the option (as a Note Priority setting) of not accepting a new note while one is held down but passing it on to the next synth in the chain, instead.
That would encourage people to own more than one anyma phi, to add more polyphonic voices.