1. Take the flute stand
   

2. Take the stand apart.
   

3. Saw off the original peg and then drill a 2.5cm deep hole 1 cm from the center. Then reassemble the stand.
   

4. Snip a 12.5cm piece off a metal hanger with plastic tubing protection. Push the plastic tube up 2.5cm to expose the metal and glue the exposed metal into the hole to make a pin.
   

5. Trim some, but not all of the plastic excess from the end of the pin. The excess plastic protects the Sylphyo from the end of the metal.
   I later glued a piece of felt to cover the exposed wood and protect the Sylphyo from scratches.

Now I have a stand that is stable and portable.