<![CDATA[Key reaction time 0 not usable?]]>(Firmware 1.4.8 on Link and Sylphyo)
When I set the key reaction time to 0 ms, my Sylphyo doesn't like me anymore. No legato playing possible and it misses many key changes. From 1 ms on it behaves normally.

Not that I would need 0 ms, just thought that it should be a valid setting.

]]>https://community.aodyo.com/topic/666/key-reaction-time-0-not-usableRSS for NodeFri, 03 Jan 2025 19:24:06 GMTWed, 28 Apr 2021 14:49:59 GMT60<![CDATA[Reply to Key reaction time 0 not usable? on Fri, 30 Apr 2021 08:01:56 GMT]]>@clint I've been able to replicate this issue on my end. We'll have a closer look at it next week. Thank you for reporting this!

]]>https://community.aodyo.com/post/2168https://community.aodyo.com/post/2168Fri, 30 Apr 2021 08:01:56 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 16:39:25 GMT]]>I concur with @Peter-Ostry ... Key Reaction = 0 seems to require that Octave Reaction = 0.

]]>https://community.aodyo.com/post/2167https://community.aodyo.com/post/2167Thu, 29 Apr 2021 16:39:25 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 14:53:54 GMT]]>@support_aodyo
Regarding factory reset: I do that quite often because I am working on a Max interface for the Sylphyo to control various synths with everything the Sylphyo offers.

Regarding 1.4.8 upgrade: Did it again, behavior remains unchanged. Key reaction 0 requires octave reaction 0.

]]>https://community.aodyo.com/post/2166https://community.aodyo.com/post/2166Thu, 29 Apr 2021 14:53:54 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 12:30:11 GMT]]>@peter-ostry Key reaction and octave key reaction are independent.
In one of our betas we had this bug where the Sylphyo would go crazy when the key reaction was set to 0ms and the octave key reaction was higher than that, but we fixed it.
Could you try a factory reset or to reinstall the latest update from our website?

I'll try to copy your settings @Clint and see if I can get this bug to appear on my end. Thanks!

]]>https://community.aodyo.com/post/2165https://community.aodyo.com/post/2165Thu, 29 Apr 2021 12:30:11 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 12:04:47 GMT]]>@support_aodyo
Ha!
If key reaction time is 0 ms, then octave key reaction time must also be 0 ms. Feels like a bug, right?

For me it is ok, I am new to the Sylphyo and currently see no reason to make the reaction slower than instantly.

To your other question:
I am on the latest 1.4.8 version, I think. Upgraded yesterday and the 'Diagnostic' functions says v1.4.8

]]>https://community.aodyo.com/post/2164https://community.aodyo.com/post/2164Thu, 29 Apr 2021 12:04:47 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 11:23:55 GMT]]>Here are my settings, with same issue as Peter ...

Clint's Configuration Settings for the Aodyo Sylphyo
Firmware version: 1.4.8
As of 4/29/2021

Sound
	Volume:	100%
	Reverb:	0%

MIDI Mapping
	Breath: CC 2
	...and
	...and

	Breath rate:	Medium (250Hz)
	...per CC:	On

	Delay notes if needed:	On

	Velocity:	Dynamnic
		Capture delay:	20ms
		Max. velocity:	127

	Slider ctrl.		CC 1
	Top slider ctrl.	CC 12
	Btm. slider ctrl.	CC 13
	Elevation ctrl.		CC 75
	Roll ctrl.		CC 76
	Compass ctrl.		CC 77
	Key-bend ctrl.		CC 78
	----
	Program change >
		Send Bank	Off
		Bank (MSB)
		Bank (LSB)
	----
	Note-off delay		10ms
	----
	
* Breath
	Minimum:	20
	Range:		600
	Curve:		Log
	Filtering:	On

* Keys
	Fingering:	NativeFlute+
	----
		Octaves: 5(+2) octaves

		Invert ocatves:	Disabled
		Left pinky: -1st: Disabled
		Right pinky: +1st: Disabled
		Replay same note: Disabled

	Reaction time: 1ms

	R.time octaves (NEW in 1.4.8): 30ms
	More sensitive (NEW in 1.4.8): Enabled

	Key-bend (BETA): PB+
	Key noise (BETA): Disabled

* Slider
	Function: Ctrl (latch)
	Top edge: Bend -
	Btm. edge: Ctrl.
	----
	Edge size: 9mm
	
* Movement
	Shake to move	Default: On

	Shake vibrato: 6%
		Sensitivity: 43%
		Threshold: 9%
	----
	Elevation control: On
		Bidirectional: Off
		Absolute: Off
		Range: +- 35 degrees

	Roll control: On
		Bidirectional: On
		Absolute: Off
		Range: +- 20 degrees

	Compass ctrl. (BETA): On
		Absolute: Off
		Bidirectional: Off
		Range: +-20 degrees
	----
	Always on: ENABLED
----
* Base Key: C3
* Output: MIDI ch. 1
----
* Invert Display: Off
* Receiver device: Connected CH 23
* LED: Off
]]>https://community.aodyo.com/post/2163https://community.aodyo.com/post/2163Thu, 29 Apr 2021 11:23:55 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 08:46:40 GMT]]>@peter-ostry Hi Peter,
0ms key reaction time is definitely a valid setting. I use it on my Sylphyo.
Can you tell me what your other settings are? Especially octave key reaction time?

Are you on the latest 1.4.8 version ?

Thanks!

]]>https://community.aodyo.com/post/2159https://community.aodyo.com/post/2159Thu, 29 Apr 2021 08:46:40 GMT<![CDATA[Reply to Key reaction time 0 not usable? on Thu, 29 Apr 2021 07:42:08 GMT]]>@peter-ostry Same "confused" results here using 0 ms [Keys / Reaction time] on v1.4.8.

Also, this test encouraged me to try Reaction time = 1 ms. This is noticeably different from 5ms ... a big improvement for me. I didn't realize how sensitive we are to a change in 4 ms latency.

]]>https://community.aodyo.com/post/2158https://community.aodyo.com/post/2158Thu, 29 Apr 2021 07:42:08 GMT